Spectrum Reserved for Trains, Mobile Operators Told to Make Room: Thông tư 67/2026/TT-BKHCN Plans Việt Nam's Railway Radio Bands

A high-speed train running at 350 km/h relies on radio as much as on rails. Signalling, the driver’s link to the control centre, emergency calls and, increasingly, video from the train all travel over a dedicated mobile network that runs along the track. Việt Nam is planning several such lines, including the North–South high-speed railway, so it needs spectrum for that network. A short circular from the Ministry of Science and Technology now provides it.

The document

Thông tư 67/2026/TT-BKHCN is titled Quy hoạch băng tần 874,4-880 MHz, 919,4-925 MHz và băng tần 1900-1910 MHz cho hệ thống thông tin di động đường sắt tại Việt Nam (Band plan for 874.4-880 MHz, 919.4-925 MHz and 1900-1910 MHz for railway mobile communication systems in Việt Nam).

  • Issued by: the Ministry of Science and Technology (Bộ Khoa học và Công nghệ), on the proposal of the Radio Frequency Department (Cục Tần số vô tuyến điện)
  • Signed: 6 November 2026, by Minister Vũ Hải Quân
  • Published: on the Government’s legal document portal on 12 November 2026
  • Effective: 24 December 2026
  • Legal basis: Luật Tần số vô tuyến điện 42/2009/QH12 as amended in 2022, and the national spectrum master plan in Quyết định 37/2025/QĐ-TTg

The circular is short: five articles on four pages.

What it plans

The circular reserves two pieces of spectrum for railway mobile systems “serving the control, safety assurance and operation of railways” (Điều 1):

  • The 900 MHz pair. 874.4-880 MHz is the uplink (train to network) and 919.4-925 MHz the downlink, used in frequency-division duplex (FDD). Each direction is a single 5.6 MHz block, named R1 and R’1.
  • The 1900 MHz band. 1900-1910 MHz is one 10 MHz block, R2, used in time-division duplex (TDD).

These are exactly the bands that Europe’s spectrum body CEPT designated for railway mobile radio in ECC Decision (20)02. The 900 MHz pair suits GSM-R, the 2G-based railway system used on most of the world’s high-speed lines, and its successor FRMCS (Future Railway Mobile Communication System), which is based on 5G. The 1900 MHz TDD band is intended for FRMCS. Picking the same bands lets Vietnamese railways buy standard equipment from the international market.

The circular states that it does not cover spectrum for public mobile networks. These bands are for railway operations, not for passengers’ phones.

One detail changed between draft and final text. Press coverage of the July 2026 draft described the 1900 MHz band as two 5 MHz blocks. The signed circular sets one 10 MHz block.

Who has to coordinate with whom

Most of the circular deals with interference, because the railway bands sit right next to busy commercial spectrum.

  • Between railway licensees (Điều 2). Where coverage overlaps or adjoins, where lines cross or run in parallel, and at shared stations, the licensees must agree on frequency use and technical measures. The agreement can cover coverage areas, field strength at the coverage edge, base station location, power, antenna height and direction, and how channels are split. In the 1900 MHz TDD band they must also align time synchronisation and frame configuration. Coordination starts at network planning and runs for the life of the network.
  • Mobile operators at 1800 and 2100 MHz (Điều 3). The 1900-1910 MHz band sits between public mobile spectrum at 1805-1880 MHz and 1920-1980 MHz. Operators licensed in 1920-1980 MHz must themselves take steps to avoid interference from railway transmitters, for example better receiver selectivity or adjusting antenna position, height or direction. Railway and mobile licensees in both neighbouring bands must cooperate on filters, power and antenna settings to keep the railway network “safe and stable”.
  • Mobile operators at 900 MHz (Điều 4). Railway licensees and public mobile operators in 890-915 MHz and 935-960 MHz must agree on frequency plans and technical solutions from the planning stage onward.
  • Users of 918.4-923 MHz (Điều 4). Licensees in this band, which overlaps the railway downlink, must proactively coordinate with the railway licensee. Coverage of the draft noted that 920-923 MHz is licensed for electronic toll collection (thu phí không dừng) on roads.

The wording puts the burden mostly on the commercial side. The stated goal in each article is to protect the railway network, which carries safety functions.

What it replaces

The circular repeals points 2.1.2 and 2.2.1 of Điều 1, and other provisions on 874.4-880 MHz and 919.4-925 MHz, in Quyết định 25/2008/QĐ-BTTTT of 16 April 2008. That decision was the old band plan for digital cellular systems in 821-960 MHz and 1710-2200 MHz. In practice, the two 900 MHz segments move out of the cellular plan and into the railway plan.

Why now

Railway projects are the driver. Coverage of the draft in July 2026 cited the planned Hà Nội–Quảng Ninh and Bến Thành–Cần Giờ high-speed lines, both designed for 350 km/h, and the North–South line. Vendors had proposed FRMCS for these projects. The Radio Frequency Department said then that a plan covering both 900 MHz and 1900 MHz was needed to give clear direction. It also said the world’s railways will start moving from GSM-R to FRMCS after 2030. High-speed and urban rail are on Việt Nam’s list of strategic technologies, and the press noted that Việt Nam is one of few countries outside Europe to plan both bands for rail.

Practical implications

  • Railway investors and system integrators now know which frequencies to design for. They can specify FRMCS or GSM-R equipment in standard 3GPP bands, and should budget for coordination with mobile operators from the design stage.
  • Mobile network operators with 900 MHz, 1800 MHz or 2100 MHz sites near railway lines may need filters, antenna changes or power adjustments. They also need a working channel with each railway licensee.
  • Toll-collection and other users near 918-923 MHz must coordinate where their equipment is close to railway lines.
  • Equipment makers and importers fall within the circular’s scope. Radio gear sold for use in Việt Nam has to fit this plan.
  • Ordinary users see no direct change. Phones do not use these bands for public service.

Open questions

  • Who gets the licences. The circular plans the bands but does not say who will be licensed, or how. With several lines owned by different investors, sharing between them is left to the coordination clauses.
  • No deadlines or dispute rules. The coordination duties have no timelines and no procedure for when parties disagree. Quyết định 52/2026/QĐ-TTg on civil–military interference shows the kind of timed procedure that is missing here.
  • Existing users of the 900 MHz segments. The circular does not say whether anyone currently uses 874.4-880 or 919.4-925 MHz under the 2008 plan, or how they would be moved.

For background, see our posts on Luật 20/2026/QH16, which amended the Radio Frequency Law, Thông tư 44/2026 on spectrum inspections, and Quyết định 52/2026/QĐ-TTg on interference between civilian and military radio.

Sources

This post is general information, not legal advice.